CMP401GS
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CMP0401 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5/+-5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 110mW |
| Max Supply Current | 2mA |
| Propagation Delay | 30 ns |
| Quiescent Current | 6mA |
| Response Time | 33 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 8V |
| Max Input Current | 3μA |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -8V |
| Current - Quiescent (Max) | 6mA1mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 3μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 60dB PSRR |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CMP401GS Overview
A convenient transport package is provided in 16-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, TTL output.This device is designed in Tube case.There are 16 terminals on the comparator.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.A total of 4 elements can be found in it.The pinout of the component starts from 16 pins it has.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.Electronic comparator has 16 pins.In case you are looking for more pin-to-pin solutions, you may want to search CMP0401 .This comparator presents a quiescent current of 6mA .Normally, the nominal supply current should be 2mA .An excess of current supply over 2mA could result in malfunction of the comparator.A power supply of 3/5/+-5V is sufficient for the operation of the device.A maximum current of 3μA can be supplied to the device.The voltage formula shows that the part has a voltage gain of 80dB .
CMP401GS Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 80dB
CMP401GS Applications
There are a lot of Analog Devices Inc. CMP401GS linear comparators applications.
- Window Comparators, Multivibrators
- General Purpose Low Voltage Applications
- High-Speed Sampling Circuits
- Wearable Devices
- Power management
- Factory automation & control
- Threshold Detectors
- Analog front end
- RC Timers
- Battery-Powered Electronics
