CMP401GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CMP0401 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5/+-5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 110mW |
| Max Supply Current | 2mA |
| Propagation Delay | 30 ns |
| Quiescent Current | 6mA |
| Response Time | 33 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 8V |
| Max Input Current | 3μA |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -8V |
| Current - Quiescent (Max) | 6mA1mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 3μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 60dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CMP401GSZ-REEL Overview
A convenient transport package is provided in 16-SOIC (0.154, 3.90mm Width) .There is a CMOS, TTL output type for this comparator.The part will be shipped by Tape & Reel (TR) .The comparator has 16 terminals.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .There are a total of 4 elements in it.The pinout of the component starts from 16 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .16 pins are present on the comparator.Search CMP0401 to find more pin-to-pin solutions.This comparator presents a quiescent current of 6mA .Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .An excess of current supply over 2mA could result in malfunction of the comparator.The device can be run with 3/5/+-5V power supplies.Electronic comparator is possible to input up to 3μA current into the device.The voltage gain of the part is indicated by 80dB in the voltage formula.
CMP401GSZ-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 80dB
CMP401GSZ-REEL Applications
There are a lot of Analog Devices Inc. CMP401GSZ-REEL linear comparators applications.
- Alarm and Monitoring Circuits
- Zero-Crossing Detectors
- Point of load regulators
- Portable and Battery-Powered Systems
- Lithium ion battery monitoring
- Current and voltage sensing
- Window Comparators
- Limit Comparators
- Ultra-Low Power Systems
- Battery-Powered Electronics
