CMP402GRUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | CMP0402 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Nominal Supply Current | 1.4mA |
| Power Dissipation | 40mW |
| Propagation Delay | 75 ns |
| Quiescent Current | 1mA |
| Response Time | 54 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Input Current | 3μA |
| Input Bias Current | 3μA |
| Current - Quiescent (Max) | 1.2mA 1mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 3μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 60dB PSRR |
| Propagation Delay (Max) | 75ns |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CMP402GRUZ-REEL Overview
In order to make transportation easier, it is packaged in 16-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .The type of the chip can be classified as General Purpose .Currently, it consists of only 4 elements.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.This comparator has 16 pins.Search CMP0402 to find more pin-to-pin solutions.There is a quiescent current of 1mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 1.4mA .There is a maximum current that can be input into the device of 3μA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 80dB .Keeping the temperature below 125°C is not recommended.Temperature lower than -40°C is not suitable for the it.Comparator electronics is specified that the comparator's maximum supply voltage is 16V .4 channels cooperate together to maintain the output quality.
CMP402GRUZ-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1mA
Voltage Gain: 80dB
CMP402GRUZ-REEL Applications
There are a lot of Analog Devices Inc. CMP402GRUZ-REEL linear comparators applications.
- Power management
- Limit Comparators
- Laptop Computers
- Automatic Test Equipment
- Factory automation & control
- Industrial
- Point of load regulators
- System control and monitoring
- Battery-Powered Electronics
- Lithium ion battery monitoring
