CP3BT26Y98AWG/NOPB
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Applications | Connectivity Processor |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~2.75V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CP3BT26 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.63V |
| Power Supplies | 2.52.5/3.3V |
| Interface | Bluetooth, ACCESS.bus, Audio, CAN, Microwire/SPI, UART, USB |
| Memory Size | 256kB |
| Number of I/O | 48 |
| RAM Size | 32K x 8 |
| Memory Type | FLASH |
| Core Processor | CR16C |
| Program Memory Type | FLASH (256kB) |
| Supply Current-Max | 20mA |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Address Bus Width | 23 |
| Core Architecture | RISC |
| Max Frequency | 24MHz |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 12 |
| Controller Series | CP3000 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CP3BT26Y98AWG/NOPB Overview
In light of its outstanding performance, it is an ideal choice for Connectivity Processor.There is a 144-LQFP package available to save space.Surface Mount is used for mounting.This item can be found in package Tube.Device with CR16C core processor issupported.Working at -40°C~85°C temperature is recommended.FLASH (256kB) is the type of program memory used by it.Because the supply voltage is 2.25V~2.75V, high efficiency can be achieved.There are 48 I/Os on it.Other components that are comparable to it have the base part number CP3BT26.The terminals of this device are set to QUAD.It is a part of the series of controllers CP3000.A 144 termination is present.The 2.5V supply voltage enables high efficiency.For data storage, FLASH is used as its memory type.There are 144 pins used in the construction of this device.Mounting is performed in accordance with Surface Mount.Microcontroller is equipped wMicrocontrollerh 144 pins in total.Subcategory Microcontrollers includes this component.Data and programs may be stored on the devices which have a memory size of 256kB.The core architecture of the system is RISC.The maximum supply current is 20mA.There is a source of power of 2.52.5/3.3V that powers this device.While deploying 3.63V, designers will be able to fully take advantage of its adaptability.The device operates with a max frequency of 24MHz.
CP3BT26Y98AWG/NOPB Features
144-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
CP3BT26Y98AWG/NOPB Applications
There are a lot of Texas Instruments CP3BT26Y98AWG/NOPB Microcontroller applications.
- Mice
- Microwave ovens
- Medical instruments chromatographs
- Fax machines
- Computers and laptops-video calling, email, blogging
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Robots
- Fire detection & safety devices
- Light sensing & controlling devices
- Auto-breaking system
