CP82C50A-5
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 40 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; ICC_MAX AT FEXT = 2.4576MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Operating Temperature (Max) | 70°C |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 6mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 10MHz |
| Data Rate | 625 kbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Bus Compatibility | 8086; 8088 |
| Data Transfer Rate-Max | 0.0762939453125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CP82C50A-5 Overview
There is a cost-effective package PDIP available.In terms of packaging, Bulk is used.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.In its configuration, 40 terminations are used.UART operates on 5V supply voltage.Data communication is supported by 1 serial I/Os.This IC measures its clock frequency at 10MHz.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.The configuration relies on the 40 pins.Maximum operating temperature is 70°C.When the supply voltage is kept above 4.5V, reliability can be ensured.When power supplies of 5V are available, it is a reliable and efficient power supply for electronic designers.In order for the device to operate efficiently, 5V is the supply voltage.Further to this, it has also been demonstrated to be able to perform TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; ICC_MAX AT FEXT = 2.4576MHZ.6mA is the maximum allowable supply current.
CP82C50A-5 Features
1 serial I/Os
Clock frequency of 10MHz
Power supplies of 5V
Operating supply voltage of 5V
TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; ICC_MAX AT FEXT = 2.4576MHZ
CP82C50A-5 Applications
There are a lot of Intersil (Renesas Electronics America) CP82C50A-5 UARTs applications.
- Network Management
- Factory Automation and Process Controls
- DTE for Modem Communication Systems
- Factory Automation
- Factory automation and process control
- Battery Operated Instruments
- Handheld Terminal
- Router C ontrol
- Portable Appliances
- Universal PCI Bus Add-in Card
