CP82C54Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 24 |
| Weight | 3.740011g |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | TIMER, PROGRAMMABLE |
| Number of Bits | 16 |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 150 ns |
| Frequency (Max) | 8MHz |
| Number of Timers/Counters | 1 |
| High Level Output Current | -2.5mA |
| Low Level Output Current | 2.5mA |
| Information Access Method | PARALLEL, DIRECT ADDRESS |
| Height | 4.95mm |
| Length | 32.7mm |
| Width | 14.73mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CP82C54Z Overview
It is enclosed in the DIP packaging along with the digital timer. Set the programmable timer's frequency to 8MHz.It is used to pack in Bulk case. To mount this digital timer with Through Hole. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 24 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 24 . The number of the chip's terminations sums up to 24. The timer clock has 3.740011g in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
CP82C54Z Features
Operate frequency at 8MHz
Package / Case: Bulk
Max Operating temperature at 0°C
1 Timers/Counters
CP82C54Z Applications
There are a lot of Intersil (Renesas Electronics America) CP82C54Z Programmable Timers & Oscillators applications.
- Power-On Reset Timer
- Watchdog Timers
- Long Time One Shot
- Building Automation
- Car Door Handle circuit
- High Vibration, High Acceleration Environments
- Domestic appliances
- Precision timing
- Smart Key
- Safety and Security Platforms
