banner_page

CPC7583MD

5V 28 Pin Telecom device1 CircuitsMin 4.5V VMax 5.5V V


  • Manufacturer: IXYS Integrated Circuits Division
  • Nocochips NO: 415-CPC7583MD
  • Package: 28-VDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 267
  • Description: 5V 28 Pin Telecom device1 CircuitsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 700μA
Max Supply Current 1μA
Current - Supply 700μA
Height 880μm
Length 11mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-VDFN Exposed Pad
Number of Pins 28
Supplier Device Package 28-DFN
Operating Temperature -40°C~110°C
Packaging Tube
Published 2009
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Resistance 110Ohm
Max Operating Temperature 110°C
Min Operating Temperature -40°C
Power (Watts) 10.5W
Max Power Dissipation 10.5W
Voltage - Supply 4.5V~5.5V
Function Line Card Access Switch
Operating Supply Voltage 5V

CPC7583MD Overview


A 28-VDFN Exposed Pad package saves space on a board.To pack telecommunications equipment, the way of Tube is used.A Surface Mount-mount is used for mounting the telecom circuit.A 1 circuit is the heart of this telecom IC .A higher supply voltage for 4.5V~5.5V will improve efficiency.-40°C~110°C is the operating temperature that can be set for reliable performance.Mounted in Surface Mount-direction.The telecom interface contains 28 pins.An electric current of 700μA is supplied to telecom equipment .With the voltage of 5V as its supply voltage, designers have a great deal of flexibility.To give designers much flexibility, it uses 700μA as the supply current.A minimum temperature value -40°C is set to ensure normal operation.It is necessary to set the temperature at the maximum value of 110°C for the telecom IC to function normally.You should supply at least 4.5V volts.Telecommunications device is recommended to supply a voltage lower than 5.5V.Normal operation requires a constant supply current of 1μA.Telecommunications equipment is able to work wTelecommunications equipmenth a resistance of 110Ohm.

CPC7583MD Features


Available in the 28-VDFN Exposed Pad package
Operating supply voltage of 5V
Operating supply current of 700μA

CPC7583MD Applications


There are a lot of IXYS Integrated Circuits Division CPC7583MD Telecom applications.

  • E1 LAN/WAN Routers
  • Remote wireless modules
  • T1/E1/J1 LAN/WAN Routers
  • T1 Digital Cross Connects (DSX-1)
  • DECT (Digital European Cordless Telephone) Base
  • Frame Relay Switches and Access Devices (FRADS)
  • Routers
  • T1 Rates PCM Line Interface
  • Digital Access Cross-connect System (DACs)
  • Residential Gateways

Write a review

Note: HTML is not translated!
    Bad           Good