CPC7592BC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~110°C |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 110°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 10mW |
| Max Power Dissipation | 10mW |
| Voltage - Supply | 4.5V~5.5V |
| Function | Line Card Access Switch |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 1μA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CPC7592BC Overview
To save board space, the 16-SOIC (0.295, 7.50mm Width) package is used.To pack telecommunications equipment, the way of Tube is used.A Surface Mount-mount is used for mounting the telecom circuit.1 circuits make up this telecom IC .4.5V~5.5V can be supplied wtelecom IC's efficiencyh a voltage that enhances efficiency.-40°C~110°C is the operating temperature that can be set for reliable performance.Mounted in the direction of Surface Mount.The telecom interface contains 16 pins.The supply voltage of 5V enables designers to have a great deal of flexibility.During normal operation, a minimum value of -40°C is set for the temperature.In order to maintain normal operation, 110°C must be set at its maximum value.The voltage supplied should be 4.5V at least.The voltage supplied should be lower than 5.5V.It is recommended to keep the supply current at 1μA for normal operation.A resistance of 100Ohm can be used with it.
CPC7592BC Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating supply voltage of 5V
CPC7592BC Applications
There are a lot of IXYS Integrated Circuits Division CPC7592BC Telecom applications.
- E3/DS3 Access Equipment
- Inverse Multiplexing for ATM (IMA)
- Router
- CSU/DSU E1/T1/J1 Interface
- Frame Relay Switches and Access Devices (FRADS)
- Multi-Line E1 Interface Cards
- Multiplexers
- SONET/SDH terminal
- Routers
- High-Density T1/E1/J1 interfaces for Multiplexers
