CPC7595MC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VDFN Exposed Pad |
| Supplier Device Package | 28-DFN |
| Operating Temperature | -40°C~110°C |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 110Ohm |
| Max Operating Temperature | 110°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 10.5mW |
| Max Power Dissipation | 10.5mW |
| Voltage - Supply | 4.5V~5.5V |
| Function | Line Card Access Switch |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2mA |
| Max Supply Current | 1μA |
| Current - Supply | 2mA |
| RoHS Status | RoHS Compliant |
CPC7595MC Overview
To save board space, the 28-VDFN Exposed Pad package is used.To pack telecommunications equipment, the way of Tube is used.Telecommunications equipment is mounted with type Surface Mount.An 1-circuit makes up this telecom IC .Providing 4.5V~5.5V wtelecom IC's efficiencyh the correct supply voltage will improve efficiency.A temperature setting of -40°C~110°C ensures reliable performance.Telecom switching is mounted in the way of Surface Mount.2mA is the supply current.The supply voltage is 5V, which provides designers with a lot of flexibility.Designers benefit from great flexibility since it works with the 2mA supply current.Temperature should be set at the minimum value of -40°C to ensure normal operation.Ensure normal operation by setting the temperature to the maximum value of 110°C.There should at least be 4.5V voltage supplied.Telecommunications device is recommended to supply a voltage lower than 5.5V.If you want to keep the supply current at 1μA, you should do so.The telecommunication product can work with a resistance of 110Ohm.
CPC7595MC Features
Available in the 28-VDFN Exposed Pad package
Operating supply voltage of 5V
Operating supply current of 2mA
CPC7595MC Applications
There are a lot of IXYS Integrated Circuits Division CPC7595MC Telecom applications.
- Interfaces to SONET STS-1 Networks
- Digital access cross connects
- Intelligent PBX
- Digital Access Cross-connect System (DACs)
- Cable Telephony
- Fiber in the loop (FITL)
- PCM Test Equipment
- Digital cross connects (DSX-1)
- PBX interfaces
- Cable modem
