banner_page

CPC7695ZC

5V 20 Pin Telecom device1 CircuitsMin 4.5V VMax 5.5V V


  • Manufacturer: IXYS Integrated Circuits Division
  • Nocochips NO: 415-CPC7695ZC
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 951
  • Description: 5V 20 Pin Telecom device1 CircuitsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Supplier Device Package 20-SOIC
Weight 800.987426mg
Operating Temperature -40°C~110°C
Packaging Tube
Published 2009
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 110Ohm
Max Operating Temperature 110°C
Min Operating Temperature -40°C
Power (Watts) 10.5mW
Max Power Dissipation 10.5mW
Voltage - Supply 4.5V~5.5V
Function Line Card Access Switch
Operating Supply Voltage 5V
Interface TTL
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 2mA
Max Supply Current 1μA
Current - Supply 2mA
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CPC7695ZC Overview


To save board space, the 20-SOIC (0.295, 7.50mm Width) package is used.The way of Tube is employed for telecommunications equipment packing.The mounting type is Surface Mount.1 circuits are used in this telecom IC .Improved efficiency can be ensured when the supply voltage of 4.5V~5.5V is provided.-40°C~110°C is a temperature setting that is reliable when telecom switching comes to performance.Surface Mount is mounted on telecom switching.20 pins are present on this telecom interface.There is a supply current of 2mA for telecom equipment to operate on.In order to provide designers with a great deal of flexibility, this telecom circuit operates on the supply voltage of 5V.The supply current of 2mA allows designers to have a great deal of flexibility.Normal operation is ensured by setting -40°C to a minimum value.The temperature is set at the maximum value of 110°C to ensure normal operation.Ideally, the voltage should be at least 4.5V.Telecommunications device is recommended that the voltage supplied be lower than 5.5V.Normal operation requires that the supply current be kept at 1μA.This telecommunication product can work with 110Ohm-resistances.

CPC7695ZC Features


Available in the 20-SOIC (0.295, 7.50mm Width) package
Operating supply voltage of 5V
Operating supply current of 2mA

CPC7695ZC Applications


There are a lot of IXYS Integrated Circuits Division CPC7695ZC Telecom applications.

  • Home Side Box
  • Fiber In The Loop (FITL)
  • Interfaces to E3
  • PCM channel bank
  • Digital Cross-Connect Systems
  • Add/Drop multiplexers (ADMs)
  • ISDN Primary Rate Interfaces (PRA)
  • Fiber in the loop (FITL)
  • Wireless Local Loop
  • Digital loop carrier (DLC)

Write a review

Note: HTML is not translated!
    Bad           Good