CR4120-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail, Panel |
| Mounting Type | DIN Rail, Panel |
| Package / Case | Module |
| Operating Temperature | 0°C~60°C |
| Packaging | Bulk |
| Published | 2013 |
| Series | CR4100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 60°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 24V |
| Frequency | 20Hz~5kHz |
| Output | Ratiometric, 4mA ~ 20mA |
| Current - Supply (Max) | 40mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 40mA |
| Accuracy | ±0.5% |
| Response Time | 250ms |
| Sensor Type | Transformer w/Conditioning |
| For Measuring | AC |
| Current - Sensing | 10A |
| RoHS Status | ROHS3 Compliant |
CR4120-10 Overview
To ensure the safety of the current sensors, they are packaged in Module packages. A protective Bulk is placed over these current sensors in order to prevent damage to the devices. In these current sensors, the maximum output current should be 40mA. In order for current sensors to be effective, their current supply should not exceed 40mA. These current sensors must operate at a temperature greater than 0°C in order to be effective. It is recommended, however, to set the maximum operating temperature of the current sensors to 60°C.
CR4120-10 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~60°C
1 Channels
Mounting Type: DIN Rail, Panel
Sensor Type: Transformer w/Conditioning
Supply Voltage: 24V
Frequency: 20Hz~5kHz
Sensing Current: 10A
Module Package
CR4120-10 Applications
There are a lot of CR Magnetics Inc. CR4120-10 Current Sensors applications.
- Inverter and H-bridge current measurements
- Power factor correction
- Power supply management
- OEM Current Sensing
- Overcurrent Detection
- Continuity
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Monitor Motor Operation
- Static converters for DC motor drives
