CR4180-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail, Panel |
| Mounting Type | DIN Rail, Panel |
| Package / Case | Module, Triple Pass Through |
| Operating Temperature | 0°C~60°C |
| Packaging | Bulk |
| Series | CR4100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 60°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 24V |
| Frequency | 20Hz~5kHz |
| Output | Ratiometric, 4mA ~ 20mA |
| Current - Supply (Max) | 110mA |
| Polarity | Bidirectional |
| Number of Channels | 3 |
| Polarization | Bidirectional |
| Max Supply Current | 110mA |
| Accuracy | ±0.5% |
| Response Time | 250ms |
| Sensor Type | Transformer w/Conditioning |
| For Measuring | AC |
| Current - Sensing | 10A |
| RoHS Status | ROHS3 Compliant |
CR4180-10 Overview
For safety purposes, the current sensors are housed in Module, Triple Pass Through packages. The devices are protected from damage by the Bulk package. Ideally, these current sensors should supply a maximum current of 110mA. A current sensor should provide a current no greater than 110mA. In order for these current sensors to work, the temperature must not be lower than 0°C. For the current sensors, however, the maximum operating temperature should be set to 60°C.
CR4180-10 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~60°C
3 Channels
Mounting Type: DIN Rail, Panel
Sensor Type: Transformer w/Conditioning
Supply Voltage: 24V
Frequency: 20Hz~5kHz
Sensing Current: 10A
Module, Triple Pass Through Package
CR4180-10 Applications
There are a lot of CR Magnetics Inc. CR4180-10 Current Sensors applications.
- DC motor drives
- Overcurrent Detection
- Proving Switch
- Industrial Monitoring and Control Systems
- Uninterruptible Power Supplies(UPS)
- Power supply management
- Overcurrent protection
- Uninterruptable Power Supllies (UPS)
- Inverter and H-bridge current measurements
- Power supplies for welding applications
