CR4410S-150
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail, Panel |
| Mounting Type | DIN Rail, Panel |
| Package / Case | Module |
| Operating Temperature | 0°C~60°C |
| Packaging | Bulk |
| Published | 2014 |
| Series | CR4400 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 60°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 24V |
| Frequency | 50Hz~400kHz |
| Output | Ratiometric, 0 V ~ 5 V |
| Current - Supply (Max) | 40mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 40mA |
| Accuracy | ±0.5% |
| Response Time | 250ms |
| Sensor Type | Transformer w/Conditioning |
| For Measuring | AC |
| Current - Sensing | 150A |
| RoHS Status | ROHS3 Compliant |
CR4410S-150 Overview
A Module package is used for the protection of the current sensors. In order to protect these current sensors, the Bulk is used to protect them. In general, current sensors should provide no more than 40mA amps of current. In order for current sensors to be effective, their current supply should not exceed 40mA. To ensure that these current sensors work, the operating temperature cannot be less than 0°C. It is recommended, however, to set the maximum operating temperature of the current sensors to 60°C.
CR4410S-150 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~60°C
1 Channels
Mounting Type: DIN Rail, Panel
Sensor Type: Transformer w/Conditioning
Supply Voltage: 24V
Frequency: 50Hz~400kHz
Sensing Current: 150A
Module Package
CR4410S-150 Applications
There are a lot of CR Magnetics Inc. CR4410S-150 Current Sensors applications.
- AC variabel speed drives and servo motor drives
- Leakage Current Sensors
- Continuity
- Electrical drives
- Motor and load control
- Switched Mode Power Supplies(SMPS)
- DC motor drives
- Monitor Motor Operation
- General purpose inverters
- Battery chargers and systems
