CR5210-100
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail, Panel |
| Mounting Type | DIN Rail, Panel |
| Package / Case | Module |
| Operating Temperature | 0°C~50°C |
| Packaging | Bulk |
| Published | 2014 |
| Series | CR5200 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 50°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 24V |
| Frequency | DC |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 40mA |
| Polarity | Unidirectional |
| Number of Channels | 1 |
| Polarization | Unidirectional |
| Max Supply Current | 40mA |
| Accuracy | ±1% |
| Response Time | 250ms |
| Sensor Type | Hall Effect, Closed Loop |
| For Measuring | DC |
| Current - Sensing | 100A |
| RoHS Status | ROHS3 Compliant |
CR5210-100 Overview
Module packages are used for the safety protection of current sensors. The current sensors are enclosed in the Bulk to prevent them from being damaged. They should be capable of supplying a maximum current of 40mA. It is recommended that current sensors do not supply a current greater than 40mA. In order for these current sensors to work, the temperature must not be lower than 0°C. As a result, the maximum operating temperature should be set to 50°C for the current sensors.
CR5210-100 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~50°C
1 Channels
Mounting Type: DIN Rail, Panel
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: 24V
Frequency: DC
Sensing Current: 100A
Module Package
CR5210-100 Applications
There are a lot of CR Magnetics Inc. CR5210-100 Current Sensors applications.
- Inverter and H-bridge current measurements
- Closed-L oop DC- and AC-Current Sensor Modules
- Motor and load control
- Power supplies for welding applications
- Switched Mode Power Supplies(SMPS)
- Uninterruptible Power Supplies(UPS)
- DC and AC power monitoring
- Continuity
- Power supply management
- Overcurrent protection
