CR5210S-75
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail, Panel |
| Mounting Type | DIN Rail, Panel |
| Package / Case | Module |
| Operating Temperature | 0°C~50°C |
| Packaging | Bulk |
| Published | 2014 |
| Series | CR5200 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 50°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 24V |
| Frequency | DC |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 35mA |
| Polarity | Unidirectional |
| Number of Channels | 1 |
| Polarization | Unidirectional |
| Max Supply Current | 35mA |
| Accuracy | ±1% |
| Response Time | 250ms |
| Sensor Type | Hall Effect, Closed Loop |
| For Measuring | DC |
| Current - Sensing | 75A |
| RoHS Status | ROHS3 Compliant |
CR5210S-75 Overview
Safety measures are taken to protect the current sensors by putting them in Module packages. The current sensors are enclosed in the Bulk to prevent them from being damaged. In this case, the maximum current supplied by the current sensors should be 35mA. It is recommended that current sensors provide a current that is not greater than 35mA. In order for these current sensors to work, the temperature must not be lower than 0°C. Current sensors, however, should be set to 50°C maximum operating temperature.
CR5210S-75 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~50°C
1 Channels
Mounting Type: DIN Rail, Panel
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: 24V
Frequency: DC
Sensing Current: 75A
Module Package
CR5210S-75 Applications
There are a lot of CR Magnetics Inc. CR5210S-75 Current Sensors applications.
- Static converters for DC motor drives
- Power Supplies for welding applications
- Battery supplied applications
- Power supplies for welding applications
- Industrial Monitoring and Control Systems
- Mobile applications
- DC motor drives
- Battery supplied applications
- Uninterruptible Power Supplies(UPS)
- Overcurrent protection
