CS168002-FZZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Bulk |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Max Power Dissipation | 100mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 1.3kHz~3.3kHz |
| Number of Outputs | 1 |
| Number of Channels | 2 |
| Max Supply Voltage | 17V |
| Output Current | 500mA |
| Max Supply Current | 11mA |
| Max Output Voltage | 21V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 12V |
| Max Input Voltage | 17V |
| Internal Switch(s) | No |
| Dimming | Triac |
| Max Input Voltage (DC) | 17V |
| Min Input Voltage (DC) | 12V |
| Number of Segments | 1 |
| Switching Frequency | 3.3MHz |
| Voltage - Supply (Min) | 11V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
CS168002-FZZ Overview
To save board space, it uses the 16-TSSOP (0.173, 4.40mm Width) package. LED drivers are designed with 1 outputs.Surface Mount represents this mounting method.With high efficiency, it emerges as a AC DC Offline Switcher.At -40°C~125°C TJ, the led driver is capable of operating.The frequency of 1.3kHz~3.3kHz is used as the basis for its operation.For its operation, 16 terminations are designed.Its configuration is based on 16 pins.If the voltage supply is below 11V, undetermined failures may occur.Based on our estimates, there are 1 segments.It's mounted by Surface Mount.The supply voltage of 17V is an acceptable maximum value.A voltage of 12V is its minimal input voltage.In terms of supply current, 17V is the maximum value.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 11mA.You can supply 500mA current to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 3.3MHz.Ideally, the output voltage should not exceed 21V.There are currently 2 channels available for transmission.
CS168002-FZZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 1.3kHz~3.3kHz
Supply voltage of 12V
Switching frequency of 3.3MHz
CS168002-FZZ Applications
There are a lot of Cirrus Logic Inc. CS168002-FZZ LED Driver ICs applications.
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- Refrigeration lighting
- Sports Facility Lighting
- Down lights
- Panel lighting
- OLED power supply for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Gallery lighting
