CS2000CP-CZZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| Type | Fractional N Synthesizer |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Max Power Dissipation | 60mW |
| Technology | HYBRID |
| Voltage - Supply | 3.1V~3.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 75MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CS2000CP |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.5V |
| Interface | I2C, SPI, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 12mA |
| Max Supply Current | 18mA |
| Input | Clock |
| Ratio - Input:Output | 2:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Input Current | 10mA |
| Divider/Multiplier | Yes/Yes |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CS2000CP-CZZ Overview
Clock ICs are packaged using the Tube method. There is a clock generator embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible. There are a total of 10 terminations in this file. This clock generator ic should receive a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. 3.5V would be the maximum supply voltage for this clock generator. As far as the supply voltage is concerned, clock PLL can be used with 3.1V~3.5V. Based on test statistics, ambient temperature should be set at -10°C~70°C. As far as this electronic part is concerned, it can be classified as a Fractional N Synthesizer component. It is a 10-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number CS2000CP. The frequency generator is equipped with 10 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. 2 signal outputs are provided for enhancing output frequency as much as possible. At 75MHz, frequency synthesizer achieves high efficiency. During these clock generator operations, the maximum current supplied reaches 18mA.
CS2000CP-CZZ Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CS2000CP-CZZ Applications
There are a lot of Cirrus Logic Inc. CS2000CP-CZZ Clock Generators applications.
- Local oscillator source in receiver
- Medical equipment
- Microwave backhaul IF
- Cable television converter boxes
- Signal modulation and demodulation
- Space communucation
- CB radios
- Camera systems
- Set-top boxes
- Modems
