banner_page

CS2100CP-CZZ

3.3V Fractional N Synthesizer CS2100CP Clock Generators 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) 10 Terminals Surface Mount 3.1V~3.5V Tube


  • Manufacturer: Cirrus Logic Inc.
  • Nocochips NO: 143-CS2100CP-CZZ
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 844
  • Description: 3.3V Fractional N Synthesizer CS2100CP Clock Generators 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) 10 Terminals Surface Mount 3.1V~3.5V Tube (Kg)

Details

Tags

Parameters
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins 10
Operating Temperature -10°C~70°C
Packaging Tube
Published 2007
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 10
Type Fractional N Synthesizer
Subcategory PLL or Frequency Synthesis Circuits
Technology HYBRID
Voltage - Supply 3.1V~3.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 75MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number CS2100CP
Pin Count 10
Number of Outputs 2
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.5V
Power Supplies 3.3V
Number of Circuits 1
Input Clock
Ratio - Input:Output 2:2
PLL Yes
Differential - Input:Output No/No
Input Current 10mA
Divider/Multiplier Yes/Yes
Length 3mm
Width 3mm

CS2100CP-CZZ Overview


The Tube method is used for packaging clock ICs. As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, this clock generator is embedded. This clock generator ic can sustain a maximum temperature of NOT SPECIFIED during reflowing. It contains 10 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed as this clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximum voltage this clock PLL can handle is 3.5V. As long as you provide 3.1V~3.5V supply voltage, it will work. The temperature should be set at -10°C~70°C to ensure reliable performance. An electrical part such as this one can be classified as a Fractional N Synthesizer component. Microprocessors are specifically designed to use this clock-generating IC, which has a 10-bit output. CS2100CP is the base part number for finding related electronic parts. The frequency generator is equipped with 10 pins. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. 2 signal outputs maximi2e the output frequency. By operating at a frequency of 75MHz, RF synthesizer is able to reali75MHze high efficiency.

CS2100CP-CZZ Features


Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

CS2100CP-CZZ Applications


There are a lot of Cirrus Logic Inc. CS2100CP-CZZ Clock Generators applications.

  • Cell phones
  • Peripheral devices
  • Signal demodulation
  • PMR (Professional Mobile Radio)
  • Picocells, femtocells and small cells
  • Automatic control system test
  • Telecommunication systems
  • Mixed mode (analog and digital) applications
  • Integrated phase noise in aerospace systems
  • Radiotelephones

Write a review

Note: HTML is not translated!
    Bad           Good