CS2300CP-CZZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| Type | Fanout Distribution, Fractional N Synthesizer |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Max Power Dissipation | 76mW |
| Technology | HYBRID |
| Voltage - Supply | 3.1V~3.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 75MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CS2300CP |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.5V |
| Power Supplies | 3.3V |
| Interface | I2C, SPI, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 18mA |
| Max Supply Current | 10mA |
| Input | Clock |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Input Current | 10mA |
| Divider/Multiplier | Yes/Yes |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CS2300CP-CZZ Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. 10 terminations can be found in frequency synthesizer. This time clock generator should be voltaged at 3.3V. In this case, Clock is designed to be the input of the clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.5V of power. In terms of supply voltage, RF synthesizer works with 3.1V~3.5V. Test statistics suggest setting the ambient temperature at -10°C~70°C, which is -10°C~70°C. This electronic component can be classified into Fanout Distribution, Fractional N Synthesizer. In particular, this clock PLL is designed to be used with microprocessors. CS2300CP is the base part number for finding related electronic parts. PF synthesizers is equipped with 10 pins. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. Clock PLL has 2 signal outputs to maximi2e output frequency. When operated at 75MHz, frequency synthesizer achieves high efficiency. The maximal current supplied for this frequency synthesizer operation reaches 10mA.
CS2300CP-CZZ Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
CS2300CP-CZZ Applications
There are a lot of Cirrus Logic Inc. CS2300CP-CZZ Clock Generators applications.
- HDD recorders
- Cable television converter boxes
- Cellular/4G
- Reference signals to RF systems
- Frequency shifting decodes
- Various decoding circuits
- Closed circuit systems
- Small signal recovery
- Threshold extension
- Instrument
