CS2841BEBN8
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | CS2841 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.4V~40V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 52kHz |
| Max Duty Cycle | 50 % |
| Switching Frequency | 60kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CS2841BEBN8 Overview
With a 8-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 7.4V~40V and has a 7.4V~40V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The Through Hole value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . A variety of 8 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. CS2841 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. A 5.1V voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. DC regulators have a maximum frequency of 52kHz. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. The frequency at which this controller generally works well is 60kHz.
CS2841BEBN8 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Switching Frequency: 60kHz
CS2841BEBN8 Applications
There are a lot of ON Semiconductor CS2841BEBN8 DC to DC converter applications.
- Analog precision reference circuits
- Cutting machine tools
- Power supplies of electronic gadgets
- Television equipment
- Handheld GPS
- Radio equipment
- Smoke exhaust equipment
- Program control systems
- Bending machines
- Series voltage regulation circuits
