CS2841BEDR14G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CS2841 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.4V~40V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 8.4V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 52kHz |
| Max Duty Cycle | 50 % |
| Switching Frequency | 60kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CS2841BEDR14G Overview
As a result of 14-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 7.4V~40V volts and has 7.4V~40V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 14 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Searching "CS2841" will return other relevant dc to dc converter ics. Switching converter has a total of 14 pins. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 8.4V. DC regulator outputs 5.1V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. The max frequency of the pmic can reach 52kHz. The frequency at which this controller can perform well is 60kHz.
CS2841BEDR14G Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Switching Frequency: 60kHz
CS2841BEDR14G Applications
There are a lot of ON Semiconductor CS2841BEDR14G DC to DC converter applications.
- Game consoles
- Pipe bending machines
- Automatic testing equipment
- Die casting equipment
- Wind power
- Energy management systems
- Lathes
- Electric water heaters
- Arc suppression circuits
- Emergency lighting monitoring equipment
