CS51021AEDR16
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CS51021A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.7V~20V |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 8.2V |
| Topology | Flyback, Forward Converter, Push-Pull |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 83 % |
| Clock Sync | Yes |
| Duty Cycle | 83 % |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CS51021AEDR16 Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 7.7V~20V and has a 7.7V~20V supply voltage. Suitable for a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 16 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 14V. A search for "CS51021A" will reveal other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 8.2V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 83 %. Switching controllers operate at 1MHz frequencies. To run the voltage regulator dc to dc safely and reliably, users should apply 20V to the voltage regulator dc to dc.
CS51021AEDR16 Features
Transistor Driver Outputs
Current Limit, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 83 %
Frequency: 1MHz
CS51021AEDR16 Applications
There are a lot of ON Semiconductor CS51021AEDR16 DC to DC converter applications.
- Solar power plants
- Thermal power
- Cutting machine tools
- Direct power supply system
- Program control systems
- Surface processing equipment
- USB circuits
- Series voltage regulation circuits
- Energy management systems
- Window air conditioners
