CS51022AEDR16G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CS51022A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.7V~20V |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 8.2V |
| Topology | Flyback, Forward Converter, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 20V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 83 % |
| Duty Cycle | 83 % |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CS51022AEDR16G Overview
It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 7.7V~20V volts and has 7.7V~20V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 16 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 14V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "CS51022A". Switching converter has a total of 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 8.2V. Considering the dc to dc regulator can only accept 20V input voltage, it is important to take note of this. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 83 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1MHz on this dc regulators.
CS51022AEDR16G Features
Transistor Driver Outputs
Current Limit, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 83 %
CS51022AEDR16G Applications
There are a lot of ON Semiconductor CS51022AEDR16G DC to DC converter applications.
- Flexible manufacturing cells
- CMM
- Smoke exhaust equipment
- Automation technology
- Printing equipment
- Sink circuits
- USB circuits
- Various precision measuring detectors
- Smart grid
- Scientific research
