CS5124XD8G
| Parameters | |
|---|---|
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 82.5% |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CS5124 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~20V |
| Control Features | Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 45ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 75V |
| Switcher Configuration | SINGLE |
CS5124XD8G Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 7.7V~20V voltage are supplied and operated. Worked in a -40°C~105°C TA dc switcher before. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Soft Start which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. CS5124 can be used to locate other relevant dc to dc converter ics. 8 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 13.5V. In most cases, the output current of the dc dc regulator will be 1mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 85 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. A frequency of 400kHz is set for the switching controller. For nominal working status, the input voltage can be set as 75V.
CS5124XD8G Features
Transistor Driver Outputs
Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 400kHz
CS5124XD8G Applications
There are a lot of ON Semiconductor CS5124XD8G DC to DC converter applications.
- Current source circuits
- Telecommunications equipment
- PSRR circuits
- Television equipment
- Smoke prevention equipment
- ATMs
- seismic instrument power circuits
- Computer application technology
- Lathes
- Serial communication converter
