CS5124XDR8G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CS5124 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~20V |
| Control Features | Soft Start |
| Input Voltage (Min) | 7.6V |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 400kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 45ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 440kHz |
| Duty Cycle (Max) | 82.5% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CS5124XDR8G Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Cut Tape (CT). The system can process Transistor Driver dc switching's outputs (s). Voltages 7.7V~20V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~105°C TA dc switcher. The switching controller is capable of switching at the 400kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 8 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. You can find other relevant dc to dc converter ics by searching "CS5124". There are a total of 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 7.6V. Statistically, DC regulator outputs 20V volts. You should note down the dc dc regulator's usual output current of 200mA when you start a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator has a maximum frequency of 440kHz.
CS5124XDR8G Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Soft Start
PULSE WIDTH MODULATION
CS5124XDR8G Applications
There are a lot of ON Semiconductor CS5124XDR8G DC to DC converter applications.
- Game consoles
- Experimental setup
- Linear guide
- Motor controller circuits
- Remotely powered electric motors
- Automatic testing equipment
- Series voltage regulation circuits
- Emergency lighting monitoring equipment
- Magnetohydrodynamic power
- Electric heating, lighting
