CS5171EDR8G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CS5171 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 39V |
| Output Type | Adjustable |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 30V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5.5mA |
| Output Configuration | Positive or Negative |
| Current - Output | 1.5A Switch |
| Voltage - Output (Min/Fixed) | 1.28V |
| Topology | Buck, Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 280kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Voltage - Output (Max) | 40V Switch |
| Length | 4.9mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CS5171EDR8G Overview
As a result of the use of the Cut Tape (CT) package, the performance of this voltage regulator is optimized. In this voltage regulator, 8 terminations are present. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-SOIC (0.154, 3.90mm Width) package. The voltage regulator 12v has 1 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. A DC-DC switching regulator such as this one switches at 280kHz. A dc to dc voltage regulator's minimum input voltage of 2.7V is required for this voltage regulator to operate. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.28V. DC DC switching regulator's 1.5A Switch output current allows for maximum design flexibility. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 3.3V is provided. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. The CS5171 family of DC/DC regulators includes this DC/DC regulator. At 39V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 8 pins that must be connected. A 1.5A A maximum output current is required to meet the switching regulator operation requirements. 40V Switch's maximal output voltage allows adjusting voltage regulator to operate easily. DC-DC switching regulator with 30V supply voltage.
CS5171EDR8G Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 30V
CS5171EDR8G Applications
There are a lot of ON Semiconductor CS5171EDR8G Voltage Regulators applications.
- PSRR circuits
- Flaw detection equipment
- Geothermal power
- Access control systems
- USB circuits
- Electric heating, lighting
- Automation technology
- CMM
- Low output voltage switching power supply circuits
- Various precision measuring detectors
