CS8240YTQVA5
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Base Part Number | CS8240 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 550mA |
| Power Supplies | 6/24V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 20 µs |
| Output Peak Current Limit-Nom | 1.1A |
| Turn Off Time | 20 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SOURCE |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CS8240YTQVA5 Overview
As a result, it is packaged in the form of a Tube.It is included in the package TO-220-5 Formed Leads.This lighting drivere has a mounting type of Through Hole.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.A maximum output voltage of Bipolar volts has been specified.It belongs to the CS8240 family.As a result, there are 5 terminations.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 550mA.A supply voltage of 12V leads to high efficiency.The LED driving board is equipped with a total of 3 pins.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to operate normally, the supply voltage (Vsup) must remain above 6V.This part has a power supply of 6/24V volts.
CS8240YTQVA5 Features
Supplied from 12V
CS8240YTQVA5 Applications
There are a lot of ON Semiconductor CS8240YTQVA5 Power Switches ICs applications.
- PC Card Hot Swap
- USB3.1 Power Delivery
- Notebook PC
- Hot Swap
- Portable Music Players
- Hot Swap
- Wearable Devices
- Low Voltage I/O System Power
- Hot Swaps
- Storage (HDDs, SSDs)
