Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
28 |
Packaging |
Bulk |
Published |
1996 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Supply Voltage |
5V |
Frequency |
12MHz |
Operating Supply Voltage |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
10mA |
uPs/uCs/Peripheral ICs Type |
TIMER, PROGRAMMABLE |
Number of Bits |
16 |
Propagation Delay |
100 ns |
Number of Timers/Counters |
1 |
High Level Output Current |
-2.5mA |
External Data Bus Width |
8 |
Low Level Output Current |
2.5mA |
Information Access Method |
PARALLEL, DIRECT ADDRESS |
Height Seated (Max) |
4.57mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
CS82C54-12 Overview
PLCC comes in a package with the timer clock. In this case, the frequency of the programmable timer is set to 12MHz.It is used to pack in Bulk case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The number of the chip's terminations sums up to 28. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
CS82C54-12 Features
Operate frequency at 12MHz
Package / Case: Bulk
Max Operating temperature at 0°C
1 Timers/Counters
CS82C54-12 Applications
There are a lot of Intersil (Renesas Electronics America) CS82C54-12 Programmable Timers & Oscillators applications.
- Safety and Security Platforms
- Sensor Node
- Home Automation Sensors
- White Goods
- Internet of Things (IoT)
- Motor control
- High Vibration, High Acceleration Environments
- Watchdog Timers
- Thermostats
- Periodic “Wake-Up” Call