CS82C54
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 1996 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 8MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10mA |
| Propagation Delay | 150 ns |
| Number of Timers/Counters | 1 |
| High Level Output Current | -2.5mA |
| Low Level Output Current | 2.5mA |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CS82C54 Overview
In the packaging with the PLCC, there is a programmable timer enclosed in the package. In the programmable timer, the frequency is set to 8MHz.It is used to pack in Bulk case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
CS82C54 Features
Operate frequency at 8MHz
Package / Case: Bulk
Max Operating temperature at 0°C
1 Timers/Counters
CS82C54 Applications
There are a lot of Intersil (Renesas Electronics America) CS82C54 Programmable Timers & Oscillators applications.
- “Heartbeat” Timers
- High Vibration, High Acceleration Environments
- Watchdog Timers
- Electric Vehicles
- Clutch Actuator circuit
- Battery Powered Systems
- Intruder Detection
- Periodic “Wake-Up” Call
- Power-Gating Applications
- Building Automation
