Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
28 |
Weight |
1.182714g |
Packaging |
Bulk |
Published |
1996 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
245 |
Supply Voltage |
5V |
Frequency |
8MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
28 |
Operating Supply Voltage |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
10mA |
Nominal Supply Current |
10mA |
uPs/uCs/Peripheral ICs Type |
TIMER, PROGRAMMABLE |
Number of Bits |
16 |
Propagation Delay |
150 ns |
Turn On Delay Time |
150 ns |
Frequency (Max) |
8MHz |
Number of Timers/Counters |
1 |
High Level Output Current |
-2.5mA |
Low Level Output Current |
2.5mA |
Information Access Method |
PARALLEL, DIRECT ADDRESS |
Current - Input |
10mA |
Height |
3.69mm |
Length |
11.58mm |
Width |
11.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CS82C54Z Overview
A PLCC-shaped packaging surrounds the digital timer. Ensure that the programmable timer's frequency is set to 8MHz.It is used to pack in Bulk case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 28 . The number of the chip's terminations sums up to 28. The timer clock has 1.182714g in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
CS82C54Z Features
Operate frequency at 8MHz
Package / Case: Bulk
Max Operating temperature at 0°C
1 Timers/Counters
CS82C54Z Applications
There are a lot of Intersil (Renesas Electronics America) CS82C54Z Programmable Timers & Oscillators applications.
- Power-Gating Applications
- Thermostats
- High Vibration, High Acceleration Environments
- Watchdog Timers
- Long Time One Shot
- Electric Vehicles
- Smart Key
- Domestic appliances
- Energy Harvesting Systems
- Power-On Reset Timer