CSD43301Q5M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-Power LFDFN |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRED BIAS VOLTAGE OF 4.5V TO 6V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CSD43301 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 80A |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Low Side |
| Output Current | 80A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Input Voltage (Min) | 4.5V |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~6V |
| Fault Protection | UVLO |
| Rds On (Typ) | 0.55m Ω |
| Height | 1.5mm |
| Length | 6mm |
| Width | 5mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CSD43301Q5M Overview
It is package in Tape & Reel (TR) case.It's included in the 12-Power LFDFN package.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of CSD43301.It consists of 12 terminations in total.In order to operate, 12 pins are used.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 80A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.It is mounted in the way of Surface Mount.Electrical components such as this are included in the NexFET? series.In this case, the output current will be set to 80A.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.There is an analog input IC in this gadget, which is SWITCHING REGULATOR.This part's power supply is 5V.Using this LED driver, it is also possible to produce ALSO REQUIRED BIAS VOLTAGE OF 4.5V TO 6V.
CSD43301Q5M Features
Supplied from 5V
Additional features like ALSO REQUIRED BIAS VOLTAGE OF 4.5V TO 6V
CSD43301Q5M Applications
There are a lot of Texas Instruments CSD43301Q5M Power Switches ICs applications.
- USB Ports/Hubs
- USB Power Distribution
- PC Card Hot Swap
- Hot Swap
- Hot Swaps
- Handheld Devices
- Solid State Drivers
- Portable Music Players
- Wireless/Networking Cards
- Notebook and Tablet Computers
