CSD95372AQ5M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-Power LFDFN |
| Number of Pins | 12 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Applications | Synchronous Buck Converters |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 12W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CSD95372 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Max Output Current | 90A |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 23mA |
| Output Configuration | Half Bridge |
| Power Dissipation | 12W |
| Output Current | 60A |
| Turn On Delay Time | 3 μs |
| Input Voltage (Min) | 4.5V |
| Output Current per Channel | 60A |
| Control Technique | PULSE WIDTH MODULATION |
| Turn-Off Delay Time | 30 ns |
| Continuous Drain Current (ID) | 60A |
| Gate to Source Voltage (Vgs) | 5.5V |
| Voltage - Load | 4.5V~16V |
| Switching Frequency-Max | 2000kHz |
| Fault Protection | Over Temperature, Shoot-Through, UVLO |
| Number of Drivers | 1 |
| Load Type | Inductive |
| Height | 1.5mm |
| Length | 6mm |
| Width | 5mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CSD95372AQ5M Overview
In order to package H bridge, Tape & Reel (TR) is used.For cost-saving purposes, H bridge is included in the 12-Power LFDFN package.Reliabilbridge drivery can be improved by increasing 4.5V~5.5V's supply voltage.H bridge circuit is mounted in the way of Surface Mount.The operating temperature of -55°C~150°C TJ enables motor driver H bridge to work normally.This tool is useful for a number of applications, including Synchronous Buck Converters.The board is mounted using Surface Mount.As H bridge ic of its specific characteristics, it also possesses Bootstrap Circuit, Status Flag.12 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.As H bridge ic of a signal interface, 12 pins are used as pronged contacts.The CSD95372 base H bridge ic number is the key to finding more related H bridge ics.The H bridge operates at a voltage of 5V.H bridge circuit has been incorporated with SWITCHING REGULATOR as its analog IC type.Basically, it is an electronic H-bridge that belongs to the NexFET? series.At a specified ambient temperature, 90A is the maximum load current that a power supply can provide.A current of 60A flows through the pins of the output and power supply.There are many similarities between this H bridge motor driver and other components in the subcategory of Power Management Circuits.The voltage released by the Hbridge is 5.5V.A load is supplied with electricity by 5V.The 1 drivers have been integrated into the system.
CSD95372AQ5M Features
Available in 12-Power LFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD95372
CSD95372AQ5M Applications
There are a lot of Texas Instruments CSD95372AQ5M Full Bridge Drivers, Half-Bridge Drivers applications.
- Compact Blade Servers
- Industrial Automation
- Small Form-Factor Voltage Regulator Modules
- Non-V-Core
- Industrial Fans
- Voltage Regulators for GPUs
- Notebook Computers
- OA equipments
- Dual DC motor
- V-Core
