banner_page

CSD95375Q4M

CSD95375Q4M datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CSD95375Q4M
  • Package: 8-PowerVFDFN
  • Datasheet: -
  • Stock: 177
  • Description: CSD95375Q4M datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Interface PWM
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 6.4mA
Output Configuration Half Bridge
Power Dissipation 8W
Output Current 25A
Input Voltage (Min) 4.5V
Control Mode CURRENT-MODE
Output Current per Channel 25A
Control Technique PULSE WIDTH MODULATION
Drain to Source Voltage (Vdss) 20V
Continuous Drain Current (ID) 25A
Gate to Source Voltage (Vgs) 5.5V
Voltage - Load 4.5V~16V
Switching Frequency-Max 2000kHz
Fault Protection Shoot-Through, UVLO
Drain to Source Breakdown Voltage 20V
Number of Drivers 1
Load Type Inductive
Length 4.5mm
Width 3.5mm
Thickness 900μm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 23 hours ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-PowerVFDFN
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series NexFET™
JESD-609 Code e4
Feature Bootstrap Circuit
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Applications Synchronous Buck Converters
Subcategory Switching Regulator or Controllers
Max Power Dissipation 8W
Technology Power MOSFET
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number CSD95375
Qualification Status Not Qualified
Max Output Current 60A
Input Voltage-Nom 5V

CSD95375Q4M Overview


For packaging, Tape & Reel (TR) is used.In order to save costs, H bridge is included in the 8-PowerVFDFN package.Based on the supply voltage of 4.5V~5.5V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted in the way of Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.Among H bridge motor drivers many uses, H bridge motor driver can be found in Synchronous Buck Converters as well.Using Surface Mount, the board is mounted.Full bridge also has a number of specific characteristics, including Bootstrap Circuit.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 8 termination.In signal interfaces, 8 pins serve as pronged contacts.Its base H bridge ic number of CSD95375 is the basis to find more related H bridge ics.As its analog IC type, H bridge circuit has been incorporated with SWITCHING REGULATOR.A H-bridge in the NexFET? series, this is a type of electronic H-bridge.An ambient temperature of 60A determines the maximum load current that a power supply can deliver.A current of 25A flows through the pins of the output and power supply.This H bridge motor driver falls under the subcategory of Switching Regulator or Controllers. It is similar to other parts within that category.In the system, 1 drivers are integrated.

CSD95375Q4M Features


Available in 8-PowerVFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD95375

CSD95375Q4M Applications


There are a lot of Texas Instruments CSD95375Q4M Full Bridge Drivers, Half-Bridge Drivers applications.

  • Home Appliances
  • Compact Blade Servers
  • VTR
  • Telecom Microprocessor
  • Industrial Automation
  • Non-V-Core
  • Audio-visual equipment
  • Notebook Computers
  • Small Form-Factor Voltage Regulator Modules
  • DVD players

Write a review

Note: HTML is not translated!
    Bad           Good