CSD95379Q3MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-PowerVFDFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit, Diode Emulation |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Synchronous Buck Converters |
| Additional Feature | ALSO REQ VIN UPTO 16V MAX |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CSD95379 |
| Input Voltage-Nom | 5V |
| Interface | PWM |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Half Bridge |
| Input Voltage (Min) | 4.5V |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Voltage - Load | 4.5V~16V |
| Current - Output / Channel | 20A |
| Switching Frequency-Max | 2000kHz |
| Fault Protection | Shoot-Through, UVLO |
| Current - Peak Output | 45A |
| Load Type | Inductive |
| Height Seated (Max) | 1mm |
| Length | 3.3mm |
| Width | 3.3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CSD95379Q3MT Overview
For packaging, it is used with Tape & Reel (TR).As a cost-saving measure, H bridge is included in the 10-PowerVFDFN package.With the 4.5V~5.5V supply voltage, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Synchronous Buck Converters is pretty useful in a variety of applications.Full bridge also has a number of specific characteristics, including Bootstrap Circuit, Diode Emulation.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 10 terminations.A signal interface uses 10 pins as pronged contacts.The base H bridge ic number of CSD95379 allows you to find more related H bridge ics by using that number.IC type DUAL SWITCHING CONTROLLER is used as H bridge circuit's analog IC.It is a kind of electronic H-bridge belonging to the NexFET? series.The maximum amount of current which output reaches 45A.H-bridge is also able to provide ALSO REQ VIN UPTO 16V MAX.
CSD95379Q3MT Features
Available in 10-PowerVFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD95379
Subcategory: 45A
With ALSO REQ VIN UPTO 16V MAX Drivers
CSD95379Q3MT Applications
There are a lot of Texas Instruments CSD95379Q3MT Full Bridge Drivers, Half-Bridge Drivers applications.
- Home Appliances
- Dual DC motor
- PC peripherals
- Non-V-Core
- Industrial Pumps
- Voltage Regulators for GPUs
- Audio-visual equipment
- High current, low profile DC-DC converters
- DVD players
- Voltage Regulators
