CSD97370AQ5M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 22-PowerLFDFN |
| Number of Pins | 22 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 22 |
| ECCN Code | EAR99 |
| Applications | Synchronous Buck Converters |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CSD97370 |
| Pin Count | 22 |
| Efficiency | 90 % |
| Output Voltage | 1.2V |
| Output Type | Adjustable |
| Max Output Current | 60A |
| Input Voltage-Nom | 12V |
| Power Supplies | 5V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Half Bridge |
| Output Current | 40A |
| Max Output Voltage | 5V |
| Min Input Voltage | 3.3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 22V |
| Output Current per Channel | 40A |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 20mA |
| Voltage - Load | 3.3V~22V |
| Switching Frequency-Max | 2000kHz |
| Fault Protection | Shoot-Through, UVLO |
| Load Type | Inductive |
| Height | 1.5mm |
| Length | 6mm |
| Width | 5mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CSD97370AQ5M Overview
It is packaged with Cut Tape (CT).For cost-saving purposes, H bridge is included in the 22-PowerLFDFN package.The supply voltage of 4.5V~5.5V can improve reliabilbridge drivery.H bridge circuit is mounted on Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.Among H bridge motor drivers many applications are Synchronous Buck Converters.On PCBs, Surface Mount mounts H gate.Among full bridges specific characteristics is Bootstrap Circuit.It is possible to terminate a transmission line with a 22 termination using the H bridge which matches the characteristic impedance of the transmission line.In signal interfaces, 22 pins serve as pronged contacts.Based on its base H bridge ic number of CSD97370, further related H bridge ics can be identified.H bridge circuit operates with the supply voltage of 5V.IC type SWITCHING REGULATOR is used as H bridge circuit's analog IC.Electronic H-bridges of the NexFET? series constitute this type of H-bridge.A power source can supply a maximum load current of 60A when the ambient temperature is specified.Through the output and power supply pins, a current of 40A is flowing.This bridge driver functions in part thanks to the 22 pins working together.There are many similarities between this H bridge motor driver and other components in the subcategory of Power Management Circuits.1.2V is the voltage released by the Hbridge.5V supplies electrical power to the load.
CSD97370AQ5M Features
Available in 22-PowerLFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD97370
CSD97370AQ5M Applications
There are a lot of Texas Instruments CSD97370AQ5M Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Automation
- Telecom Microprocessor
- Compact Blade Servers
- Non-V-Core
- PC peripherals
- Quad DC motor
- High-Current DC-DC Point-of-Load Converters
- Notebook Computers
- Optical disc drives
- Voltage Regulators for GPUs
