CSD97370Q5M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 22-PowerLFDFN |
| Number of Pins | 22 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 22 |
| ECCN Code | EAR99 |
| Applications | Synchronous Buck Converters |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 12W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CSD97370 |
| Pin Count | 22 |
| Output Voltage | 5.5V |
| Max Output Current | 60A |
| Input Voltage-Nom | 12V |
| Power Supplies | 5V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 16mA |
| Output Configuration | Half Bridge |
| Power Dissipation | 12W |
| Output Current | 40A |
| Input Voltage (Min) | 3.3V |
| Control Mode | VOLTAGE-MODE |
| Output Current per Channel | 40A |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 600ns |
| Supply Current-Max (Isup) | 20mA |
| Fall Time (Typ) | 200 ns |
| Turn-Off Delay Time | 100 ns |
| Voltage - Load | 3.3V~22V |
| Switching Frequency-Max | 2000kHz |
| Fault Protection | Shoot-Through, UVLO |
| Number of Drivers | 1 |
| Load Type | Inductive |
| Height | 1.5mm |
| Length | 6mm |
| Width | 5mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
CSD97370Q5M Overview
It is packaged with Cut Tape (CT).In an effort to save money, H bridge is included in the 22-PowerLFDFN package.Reliabilbridge drivery can be improved by increasing 4.5V~5.5V's supply voltage.Surface Mount is mounted on H bridge circuit.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many applications are Synchronous Buck Converters.On the PCB H gate is mounted using Surface Mount.H gates specific characteristics also include Bootstrap Circuit.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 22 termination.Signal interfaces include 22 pins that serve as pronged contacts.Based on its base H bridge ic number of CSD97370, further related H bridge ics can be identified.A voltage of 5V is used as the supply voltage.H bridge circuit incorporates SWITCHING REGULATOR as its analog IC type.This is a type of electronic H-bridge that belongs to the NexFET? series.The maximum load current that power supply can provide at a specified ambient temperature reaches 60A.Through the pins of the power supply and output, there is a current of 40A.It is through the 22 pins that the bridge driver can perform its specific functions.There are many similarities between this H bridge motor driver and other components in the subcategory of Power Management Circuits.In this case, the voltage released by the Hbridge is 5.5V.An electrical load is supplied with power from 5V.There are integrated 1 drivers in the system.
CSD97370Q5M Features
Available in 22-PowerLFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD97370
CSD97370Q5M Applications
There are a lot of Texas Instruments CSD97370Q5M Full Bridge Drivers, Half-Bridge Drivers applications.
- High-Performance Gaming Motherboards
- Audio-visual equipment
- Industrial Pumps
- Voltage Regulators for CPUs
- PC peripherals
- Notebook Computers
- Voltage Regulators for DDR memory arrays
- Industrial Automation
- VTR
- Dual DC motor
