CSD97396Q4M
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CSD97396 |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 65A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Half Bridge |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 24V |
| Output Current per Channel | 30A |
| Control Technique | PULSE WIDTH MODULATION |
| Voltage - Load | 4.5V~24V |
| Fault Protection | Shoot-Through |
| Switching Frequency | 2MHz |
| Load Type | Inductive |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerVFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | NexFET™ |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit, Diode Emulation |
CSD97396Q4M Overview
H bridge is packaged using Tape & Reel (TR).The 8-PowerVFDFN package includes H bridge to save money.With the 4.5V~5.5V supply voltage, improved reliabilbridge drivery can be achieved.In Surface Mount, H bridge circuit is mounted.-40°C~150°C TJ is able to function normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including Synchronous Buck Converters.The board is mounted using Surface Mount.Bootstrap Circuit, Diode Emulation is one of full bridges specific characteristics.8 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.It is used as a pronged contact as H bridge ic of a signal interface when 8 pins are used.The base H bridge ic number of CSD97396 can be used to find related H bridge ics.This H bridge circuit incorporates an analog IC with the type SWITCHING REGULATOR.The H-bridge is an electronic H-bridge of the NexFET? series.An ambient temperature of 65A determines the maximum load current that a power supply can deliver.It is equipped with 1 outputs.A high degree of efficiency is achieved by maintaining the operating supply voltage at 5.5V.This Hbridge releases a voltage of 1.8V.
CSD97396Q4M Features
Available in 8-PowerVFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD97396
Number of Receivers: 5.5V
CSD97396Q4M Applications
There are a lot of Texas Instruments CSD97396Q4M Full Bridge Drivers, Half-Bridge Drivers applications.
- Home Appliances
- V-Core
- Dual DC motor
- VTR
- Voltage Regulators for GPUs
- Bipolar stepper motor
- Notebook Computers
- High-Performance Gaming Motherboards
- Audio-visual equipment
- Small Form-Factor Voltage Regulator Modules
