Parameters |
For Measuring |
AC/DC |
Current - Sensing |
1A |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Factory Lead Time |
1 Week |
Mount |
PCB, Screw |
Mounting Type |
Through Hole |
Package / Case |
Module, Single Pass Through |
Housing Material |
PBT |
Operating Temperature |
-25°C~85°C |
Packaging |
Bulk |
Published |
1998 |
Series |
CSDA |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Connector |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-25°C |
Voltage - Supply |
6V~16V |
Current Rating |
12mA |
Output |
NPN |
Current - Supply (Max) |
12mA |
Output Voltage |
400mV |
Output Type |
Voltage |
Polarity |
Bidirectional |
Number of Channels |
1 |
Max Supply Voltage |
16V |
Min Supply Voltage |
6V |
Polarization |
Bidirectional |
Nominal Supply Current |
12mA |
Output Current |
20mA |
Max Supply Current |
12mA |
Accuracy |
±0.5% |
Max Output Voltage |
400mV |
Response Time |
100μs |
Wire/Cable Diameter |
10.92 mm |
Sensor Type |
Current Switch |
Sensing Method |
Inductive |
Max Supply Voltage (DC) |
16V |
Min Supply Voltage (DC) |
6V |
CSDA1BA Overview
In order to ensure safety, the current sensors are packaged in Module, Single Pass Through packages. A Bulk package protects these current sensors from damage. It is recommended that these current sensors supply a maximum current of 12mA. There should not be an increase in current supplied by current sensors above 12mA. To ensure that these current sensors function properly, the operating temperature must not be lower than -25°C. Nonetheless, the maximum operating temperature for the current sensors should be set to 85°C. Current sensors have been designed to measure 12mA current. By definition, current sensors should provide a 12mA current. When current sensors are used, their voltage output should be 400mV. Current sensors should produce a 20mA output. In a DC circuit, the voltage supplied by these sensors should not be lower than 6V. The voltage supplied by the current sensors should not exceed 16V in the DC circuit, however.
CSDA1BA Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 1A
Module, Single Pass Through Package
CSDA1BA Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSDA1BA Current Sensors applications.
- Static converters for for DC motor drives
- Battery chargers and systems
- Power factor correction
- Battery supplied applications
- DC motor drives
- Closed-L oop DC- and AC-Current Sensor Modules
- Power supplies for welding applications
- Uninterruptable Power Supllies (UPS)
- DC and AC power monitoring
- Power Supplies for welding applications