CSDA1DC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Chassis Mount, Screw |
| Mounting Type | Chassis Mount |
| Package / Case | Module, Single Pass Through |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSDA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~16V |
| Current Rating | 12mA |
| Output | NPN |
| Current - Supply (Max) | 12mA |
| Output Voltage | 400mV |
| Operating Supply Voltage | 16V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 6.5A |
| Max Supply Current | 12mA |
| Accuracy | ±0.5% |
| Response Time | 100μs |
| Sensor Type | Current Switch |
| Max Supply Voltage (DC) | 16V |
| Min Supply Voltage (DC) | 6V |
| For Measuring | AC/DC |
| Current - Sensing | 7.5A |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CSDA1DC Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. Current sensors are packaged in the Bulk for protection. It is recommended that these current sensors provide no more than 12mA amps of current. The current supplied by current sensors should not be higher than 12mA. In order for the current sensors to operate, the operating temperature must not be lower than -25°C. Current sensors, however, should be set to 85°C maximum operating temperature. In this case, the current sensors have been designed for a current of 12mA. When operating, the current sensors could deliver a voltage of 16V. As a general rule, current sensors should supply an electrical current of 6.5A. Current sensors should output 400mV voltage. These sensors should not provide voltages lower than 6V in a DC circuit. It is important, however, that the voltage supplied by the current sensors does not exceed 16V in the DC circuit.
CSDA1DC Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Chassis Mount
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 7.5A
Module, Single Pass Through Package
CSDA1DC Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSDA1DC Current Sensors applications.
- Switched Mode Power Supplies(SMPS)
- Frequency, Voltage, and Solar Inverters
- DC and AC power monitoring
- Switched Mode Power Supplies (SMPS)
- Power factor correction
- Overcurrent Detection
- Static converters for DC motor drives
- Battery supplied applications
- DC motor drives
- Home Automation
