CSDB1CC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Chassis Mount, Screw |
| Mounting Type | Chassis Mount |
| Package / Case | Module, Single Pass Through |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSD |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~16V |
| Depth | 70.1mm |
| Current Rating | 12mA |
| Output | NPN |
| Current - Supply (Max) | 16mA |
| Output Voltage | 300mV |
| Output Type | Digital |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 8V |
| Polarization | Bidirectional |
| Nominal Supply Current | 6.5A |
| Max Supply Current | 16mA |
| Accuracy | 0.5 % |
| Response Time | 100μs |
| Sensor Type | Current Switch |
| Max Supply Voltage (DC) | 16V |
| Min Supply Voltage (DC) | 8V |
| For Measuring | AC/DC |
| Switching Current | 100mA |
| Current - Sensing | 7.5A |
| Length | 5.6mm |
| Width | 25.4mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CSDB1CC Overview
A Module, Single Pass Through package is used for the protection of the current sensors. A Bulk package protects these current sensors from damage. There should be 16mA as the maximum current supplied by these current sensors. It is important that current sensors do not supply more current than 16mA. In order for these current sensors to work, the temperature must not be lower than -25°C. For the current sensors, however, the maximum operating temperature should be set to 85°C. Current sensors have been designed to measure current at 12mA. As a rule of thumb, current sensors should supply 6.5A current. Current sensors should output a voltage of 300mV. DC circuits must have a voltage that does not fall below 8V. But in the DC circuit, the current sensors should not provide more voltage than 16V.
CSDB1CC Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Chassis Mount
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 7.5A
Module, Single Pass Through Package
CSDB1CC Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSDB1CC Current Sensors applications.
- Battery chargers and systems
- AC variabel speed drives and servo motor drives
- Motor and load control
- Proving Switch
- DC motor drives
- Power factor correction
- Frequency, Voltage, and Solar Inverters
- Power supplies for welding applications
- Monitor Motor Operation
- Inverter and H-bridge current measurements
