CSDC1AC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSDA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 5V |
| Current Rating | 7.5A |
| Output | NPN |
| Current - Supply (Max) | 12mA |
| Operating Supply Voltage | 5V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 5.2V |
| Min Supply Voltage | 4.8V |
| Polarization | Bidirectional |
| Max Supply Current | 12mA |
| Accuracy | 0.5 % |
| Max Output Voltage | 400mV |
| Response Time | 100μs |
| Sensor Type | Current Switch |
| For Measuring | AC/DC |
| Current - Sensing | 7.5A |
| RoHS Status | RoHS Compliant |
CSDC1AC Overview
Safety measures are taken to protect the current sensors by putting them in Module, Single Pass Through packages. In order to protect these current sensors, the Bulk is used to protect them. It is recommended that these current sensors supply a maximum current of 12mA. There should not be an increase in current supplied by current sensors above 12mA. To ensure proper operation of these current sensors, the operating temperature cannot be below -25°C. However, the maximum operating temperature for the current sensors should be 85°C. The current for which the current sensors have been designed is 7.5A. When the current sensors operate, they could output 5V voltage.
CSDC1AC Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Current Switch
Supply Voltage: 5V
Sensing Current: 7.5A
Module, Single Pass Through Package
CSDC1AC Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSDC1AC Current Sensors applications.
- Overcurrent Detection
- Battery supplied applications
- Switched Mode Power Supplies (SMPS)
- Motor and load control
- OEM Current Sensing
- Inverter and H-bridge current measurements
- Continuity
- Overcurrent protection
- AC variabel speed drives and servo motor drives
- Proving Switch
