CSDC1BA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSDA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 5V |
| Current Rating | 12mA |
| Output | NPN |
| Current - Supply (Max) | 12mA |
| Output Voltage | 400mV |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 6V |
| Polarization | Bidirectional |
| Nominal Supply Current | 88mA |
| Max Supply Current | 12mA |
| Accuracy | 0.5 % |
| Max Output Voltage | 400mV |
| Response Time | 100μs |
| Sensor Type | Current Switch |
| Max Supply Voltage (DC) | 16V |
| Min Supply Voltage (DC) | 6V |
| For Measuring | AC/DC |
| Current - Sensing | 1A |
| Length | 19mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CSDC1BA Overview
As a safety precaution, current sensors are placed in Module, Single Pass Through packages. The current sensors are packaged in the Bulk in order to prevent damage to the devices. These current sensors should be able to deliver a maximum current of 12mA. Current sensors should not provide more current than 12mA. This current sensor must operate at a temperature greater than -25°C. Current sensors should, however, be set to 85°C for their maximum operating temperature. Current sensors have been designed for 12mA current. The nominal current supplied by current sensors is 88mA. Voltage output by current sensors should be 400mV. In a DC circuit, these sensors must provide voltages greater than 6V. In the DC circuit, the voltage provided by the current sensors should not exceed 16V.
CSDC1BA Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Current Switch
Supply Voltage: 5V
Sensing Current: 1A
Module, Single Pass Through Package
CSDC1BA Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSDC1BA Current Sensors applications.
- Battery chargers and systems
- Home Automation
- AC variable speed drives
- Monitor Motor Operation
- Mobile applications
- DC and AC power monitoring
- Switched Mode Power Supplies(SMPS)
- Electrical drives
- Proving Switch
- Inverter and H-bridge current measurements
