CSDC1DA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSDA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 5V |
| Depth | 19mm |
| Current Rating | 1A |
| Output | NPN |
| Current - Supply (Max) | 12mA |
| Output Voltage | 400mV |
| Output Type | Digital |
| Operating Supply Voltage | 5V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 5.2V |
| Min Supply Voltage | 4.8V |
| Polarization | Bidirectional |
| Nominal Supply Current | 880mA |
| Max Supply Current | 12mA |
| Accuracy | 0.5 % |
| Max Output Voltage | 400mV |
| Response Time | 100μs |
| Sensor Type | Current Switch |
| For Measuring | AC/DC |
| Switching Current | 20mA |
| Current - Sensing | 1A |
| Length | 31.8mm |
| Width | 25.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CSDC1DA Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. In order to protect these current sensors from damage, they are packaged in the Bulk. They should be capable of supplying a maximum current of 12mA. It is important that current sensors do not supply more current than 12mA. To ensure that these current sensors work, the operating temperature cannot be less than -25°C. But the maximum operating temperature for current sensors should be set to 85°C. Current sensors have been designed to measure current at 1A. When the current sensors operate, they could output 5V voltage. Sensors that supply current should supply 880mA current nominally. Current sensors should output a voltage of 400mV.
CSDC1DA Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Current Switch
Supply Voltage: 5V
Sensing Current: 1A
Module, Single Pass Through Package
CSDC1DA Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSDC1DA Current Sensors applications.
- DC motor drives
- Overcurrent Detection
- Power Supplies for welding applications
- Static converters for DC motor drives
- Inverter and H-bridge current measurements
- Switched Mode Power Supplies (SMPS)
- Battery supplied applications
- Mobile applications
- Proving Switch
- General purpose inverters
