CSLA1CE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 8V~16V |
| Current Rating | 75A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 19mA |
| Output Type | Voltage |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 8V |
| Polarization | Bidirectional |
| Nominal Supply Current | 19mA |
| Max Supply Current | 19mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 39.4mV/N |
| For Measuring | AC/DC |
| Current - Sensing | 75A |
| RoHS Status | RoHS Compliant |
CSLA1CE Overview
As a safety precaution, the current sensors are packaged in Module, Single Pass Through packages. In order to prevent damage to the devices, these current sensors are packaged in Bulk. They should be capable of supplying a maximum current of 19mA. It is recommended that current sensors provide a current that is not greater than 19mA. These current sensors must operate at a temperature greater than -25°C in order to be effective. Nevertheless, the maximum operating temperature should be set to 85°C. A current sensor is designed for a current of 75A. On this current sensor, there are 3 pins. Nominally, the current supplied by current sensors should be 19mA.
CSLA1CE Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 75A
Module, Single Pass Through Package
CSLA1CE Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA1CE Current Sensors applications.
- Static converters for for DC motor drives
- Overcurrent Detection
- Switched Mode Power Supplies(SMPS)
- AC variabel speed drives and servo motor drives
- Overcurrent protection
- Switched Mode Power Supplies (SMPS)
- Closed-L oop DC- and AC-Current Sensor Modules
- Continuity
- Uninterruptable Power Supllies (UPS)
- Frequency, Voltage, and Solar Inverters
