Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Module, Single Pass Through |
Number of Pins |
3 |
Operating Temperature |
-25°C~85°C |
Packaging |
Bulk |
Published |
1998 |
Series |
CSLA |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-25°C |
Voltage - Supply |
8V~16V |
Current Rating |
19mA |
Output |
Ratiometric, Voltage |
Current - Supply (Max) |
19mA |
Operating Supply Voltage |
16V |
Polarity |
Bidirectional |
Number of Channels |
1 |
Polarization |
Bidirectional |
Max Supply Current |
19mA |
Response Time |
3μs |
Sensor Type |
Hall Effect, Open Loop |
Sensitivity |
24.6mV/N |
For Measuring |
AC/DC |
Current - Sensing |
120A |
RoHS Status |
RoHS Compliant |
CSLA1DG Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. As a safety measure, the current sensors are packaged inside the Bulk to prevent damage to the devices. They should be capable of supplying a maximum current of 19mA. The current supplied by current sensors should not be higher than 19mA. The operating temperature must not be lower than -25°C to ensure these current sensors work. Current sensors should, however, be set to 85°C for their maximum operating temperature. The current for which the current sensors have been designed is 19mA. There are 3 pins in this current sensor. In operation, the current sensors could produce 16V.
CSLA1DG Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 120A
Module, Single Pass Through Package
CSLA1DG Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA1DG Current Sensors applications.
- Battery chargers and systems
- Frequency, Voltage, and Solar Inverters
- Monitor Motor Operation
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- AC variabel speed drives and servo motor drives
- Inverter and H-bridge current measurements
- Continuity
- Power factor correction
- Uninterruptible Power Supplies(UPS)