CSLA1DJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 8V~16V |
| Current Rating | 225A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 19mA |
| Output Type | Voltage |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 8V |
| Polarization | Bidirectional |
| Nominal Supply Current | 19mA |
| Max Supply Current | 19mA |
| Accuracy | 2 % |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensing Method | Inductive |
| Sensitivity | 13.2mV/N |
| Max Supply Voltage (DC) | 16V |
| Min Supply Voltage (DC) | 8V |
| For Measuring | AC/DC |
| Current - Sensing | 225A |
| Length | 35.6mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CSLA1DJ Overview
In order to ensure safety, the current sensors are placed in Module, Single Pass Through packages. It is designed to protect the current sensors from damage by packaging them in the Bulk. It is recommended that these current sensors supply a maximum current of 19mA. It is recommended that current sensors provide a current that is not greater than 19mA. To ensure proper operation of these current sensors, the operating temperature cannot be below -25°C. Nevertheless, the maximum operating temperature for the current sensors should be set to 85°C. A 225A current sensor has been designed for a 225A current. In this current sensor, there are 3 pins. By definition, current sensors should provide a 19mA current. These sensors should supply a voltage of at least 8V in a DC circuit. But the voltage supplied by the current sensors should not exceed 16V in the DC circuit.
CSLA1DJ Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 225A
Module, Single Pass Through Package
CSLA1DJ Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA1DJ Current Sensors applications.
- Static converters for DC motor drives
- Monitor Motor Operation
- DC motor drives
- Overcurrent protection
- Uninterruptible Power Supplies(UPS)
- Power supplies for welding applications
- Battery supplied applications
- Motor and load control
- Electrical drives
- Switched Mode Power Supplies(SMPS)
