CSLA1DK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 8V~16V |
| Current Rating | 19mA |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 19mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 8V |
| Polarization | Bidirectional |
| Nominal Supply Current | 19mA |
| Max Supply Current | 19mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 9.1mV/N |
| For Measuring | AC/DC |
| Current - Sensing | 325A |
| Length | 35.6mm |
| RoHS Status | RoHS Compliant |
CSLA1DK Overview
A Module, Single Pass Through package is used to protect the current sensors from damage. Bulk protects the current sensors from damage. In general, current sensors should provide no more than 19mA amps of current. Current sensors should not supply more current than 19mA. In order for these current sensors to function properly, the operating temperature must not be below -25°C. There should, however, be 85°C maximum operating temperature set for the current sensors. A current sensor is designed for a current of 19mA. This current sensor consists of 3 pins. Nominally, the current supplied by current sensors should be 19mA.
CSLA1DK Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 325A
Module, Single Pass Through Package
CSLA1DK Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA1DK Current Sensors applications.
- Overcurrent Detection
- Inverter and H-bridge current measurements
- Battery supplied applications
- Uninterruptable Power Supllies (UPS)
- Frequency, Voltage, and Solar Inverters
- Power supplies for welding applications
- Switched Mode Power Supplies(SMPS)
- Static converters for DC motor drives
- Switched Mode Power Supplies (SMPS)
- Home Automation
