CSLA1GD
| Parameters | |
|---|---|
| Sensitivity | 49.6mV/N |
| For Measuring | AC/DC |
| Current - Sensing | 57A |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 8V~16V |
| Current Rating | 950A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 19mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 19mA |
| Max Supply Current | 19mA |
| Accuracy | 1 % |
| Response Time | 3μs |
| Wire/Cable Diameter | 15 mm |
| Sensor Type | Hall Effect, Open Loop |
CSLA1GD Overview
Current sensors are packaged in Module, Single Pass Through packages to ensure their safety. To protect the current sensors against damage, they have been packaged in the Bulk. This current sensor should be able to supply a maximum current of 19mA. It is important that current sensors do not supply more current than 19mA. The operating temperature must not be lower than -25°C to ensure these current sensors work. It is recommended that the maximum operating temperature of the current sensors is set to 85°C. A current sensor is designed for a current of 950A. As far as the current sensor is concerned, it has 3 pins. As a rule of thumb, current sensors should supply 19mA current.
CSLA1GD Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 57A
Module, Single Pass Through Package
CSLA1GD Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA1GD Current Sensors applications.
- Power factor correction
- Switched Mode Power Supplies (SMPS)
- AC variabel speed drives and servo motor drives
- AC variable speed drives
- General purpose inverters
- Overcurrent Detection
- Power Supplies for welding applications
- Uninterruptable Power Supllies (UPS)
- Power supply management
- Mobile applications
