CSLA2DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~12V |
| Current Rating | 150A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 6V |
| Polarization | Bidirectional |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Response Time | 3μs |
| Wire/Cable Diameter | 15.7 mm |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 16.2mV/N |
| Max Supply Voltage (DC) | 12V |
| Min Supply Voltage (DC) | 6V |
| For Measuring | AC/DC |
| Current - Sensing | 150A |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CSLA2DG Overview
In order to ensure safety, the current sensors are packaged in Module, Single Pass Through packages. Current sensors are packaged in the Bulk for protection. It is recommended that these current sensors supply a maximum current of 20mA. It is important that current sensors do not supply more current than 20mA. To make these current sensors work, their operating temperature must not fall below -25°C. Current sensors should, however, be set to 85°C for their maximum operating temperature. Current sensors are designed to detect 150A current. Currently, this sensor has 3 pins. The nominal current supplied by current sensors should be 20mA. The sensors should provide voltages not less than 6V in DC circuits. It is important, however, that the voltage supplied by the current sensors does not exceed 12V in the DC circuit.
CSLA2DG Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 150A
Module, Single Pass Through Package
CSLA2DG Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA2DG Current Sensors applications.
- DC motor drives
- Closed-L oop DC- and AC-Current Sensor Modules
- Home Automation
- Power supplies for welding applications
- Battery supplied applications
- Inverter and H-bridge current measurements
- Power Supplies for welding applications
- OEM Current Sensing
- Continuity
- Monitor Motor Operation
