CSLA2DJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~12V |
| Current Rating | 20mA |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 6V |
| Operating Supply Current | 13mA |
| Polarization | Bidirectional |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 8.7mV/N |
| Max Supply Voltage (DC) | 12V |
| Min Supply Voltage (DC) | 6V |
| For Measuring | AC/DC |
| Current - Sensing | 225A |
| Length | 35.6mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CSLA2DJ Overview
Safety measures are taken to protect the current sensors by putting them in Module, Single Pass Through packages. The current sensors are packaged in the Bulk in order to prevent damage to the devices. They should be capable of supplying a maximum current of 20mA. There should be no current greater than 20mA coming from current sensors. In order for these current sensors to work, the temperature must not be lower than -25°C. However, the maximum operating temperature for the current sensors should be set to 85°C. A current sensor is designed for a current of 20mA. This current sensor has 3 pins. Nominally, the current supplied by current sensors should be 20mA. This sensors should supply a voltage not less than 6V in a DC circuit. In the DC circuit, however, the voltage supplied by the current sensors should not exceed 12V. When operating, these components should supply 13mA current.
CSLA2DJ Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 225A
Module, Single Pass Through Package
CSLA2DJ Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA2DJ Current Sensors applications.
- Frequency, Voltage, and Solar Inverters
- Overcurrent Detection
- Power factor correction
- Battery supplied applications
- Leakage Current Sensors
- Power supplies for welding applications
- General purpose inverters
- OEM Current Sensing
- Monitor Motor Operation
- Mobile applications
